| Author | Message | ||
     Larry devore (Ldevo2) New Member Username: Ldevo2 Post Number: 2 Registered: 05-2003 |
What is the procedure for filling the swivel balls? Is it take the fill plug off and the level plug out pour gear oil in the fill port until oil just starts to come out of the level plug hole. Can you just remove the level plug and if oil comes out then you are ok. Because I tried just the level plug removed it just drip out but when I removed the fill plug a lot more came out. thanks for your help in advance. | ||
| Jaime Crusellas (Jaime) New Member Username: Jaime Post Number: 30 Registered: 05-2003 |
I think that when you removed the fill plug, air went in which allowed the rest of the 90 wt oil to come out more easily. Needless to say, the lowest plug is the drain plug, and the highest is the fill plug. After you drain them, close the drain plug, and fill until the oil just comes out the fill plug. |
