Paint care Log Out | Topics | Search
Moderators | Register | Edit Profile

DiscoWeb Bulletin Board » Message Archives » 2003 Archives - Discovery Technical » Archive through July 21, 2003 » Paint care « Previous Next »

Author Message
 

Alex Moore (Landvagabund)
New Member
Username: Landvagabund

Post Number: 30
Registered: 02-2003
Posted on Wednesday, July 16, 2003 - 11:11 pm:   Edit Post Delete Post Print Post

What have you all found are the best exterior paint car products? I have a '98 D-1... it's black... and looking pretty SCRATCHED. I need to do something about it...

Thanks,
Alex
 

Chris Whybrew (Dcwhybrew)
Member
Username: Dcwhybrew

Post Number: 56
Registered: 05-2003
Posted on Thursday, July 17, 2003 - 12:23 am:   Edit Post Delete Post Print Post

I use McGuire's products. Start with their paint cleaner (goes on and off like wax) and then use McGuire's carnuba wax or McGuire's Gold wax. This treatment should cover the scratches pretty well. Note, it's a good idea to put a coat of wax on just before you go wheeling.
 

Alex Moore (Landvagabund)
New Member
Username: Landvagabund

Post Number: 31
Registered: 02-2003
Posted on Thursday, July 17, 2003 - 12:18 pm:   Edit Post Delete Post Print Post

Hey Chris, that's a good idea. Thanks for the advice.
 

Chris Whybrew (Dcwhybrew)
Member
Username: Dcwhybrew

Post Number: 57
Registered: 05-2003
Posted on Thursday, July 17, 2003 - 06:51 pm:   Edit Post Delete Post Print Post

No problem Alex, you might want to make your life easier and buy a rotary buffer at WalMart, Kmart, or someplace that sells them. You should be able to get them between $15 & 20 bucks.

Chris
 

Robert Sublett (Rubisco98)
Senior Member
Username: Rubisco98

Post Number: 953
Registered: 04-2002
Posted on Thursday, July 17, 2003 - 06:54 pm:   Edit Post Delete Post Print Post

For those really tough scratches, try McGuire's Scratch X. That stuff works pretty dang good at getting out scratches. Be sure to wax over the areas you use that stuff though.. Later.. RS
 

Sandy Grice (Apg)
New Member
Username: Apg

Post Number: 9
Registered: 02-2003
Posted on Friday, July 18, 2003 - 10:40 am:   Edit Post Delete Post Print Post

Okay...how about removing failed clear coat?

Part of the bonnet and hood look cancerous...you can see how one last pass of the clearcoat spray 'bell' failed. When the vehicle is wet, the paint looks fine! ;-)

Now I don't care too much about scratches and such, but I'd (actually, SWMBO....) like the vehicle to be all the same color. And 'mud' doesn't qualify.

You can't believe how much the dealership wants for a re-spray. I guess Earl Scheib's 'one color' work (body, tires, glass....) ain't *too* bad....
 

Jacquelyne Davis (Jmdavis)
New Member
Username: Jmdavis

Post Number: 18
Registered: 06-2003
Posted on Friday, July 18, 2003 - 10:56 am:   Edit Post Delete Post Print Post

Funny Alex, I was going to ask the same question. I have numerous tree limb scratches on both sides. Yesterday, after reading this post, I went and bought some of the MacGuire's Gold Wax. I washed, then waxed my Rover. I've never waxed it before, and that was a HUGE job! But, it looks awesome now, and only one of the deeper scratches remains, albeit very shiny. So, my husband liked my detail job so much, he happily left HIS Rover home today...
 

Ron Johnson (Chauner)
New Member
Username: Chauner

Post Number: 28
Registered: 05-2003
Posted on Friday, July 18, 2003 - 11:20 am:   Edit Post Delete Post Print Post

3M makes a great hand glaze that is designed to take out all minor scratches, as long as it's not through the paint which nothing will help you there except new paint. It's tough to use and the surface of the truck cannot be warm and I would recommend waxing afterwards.
 

Brian Dickens (Bri)
Senior Member
Username: Bri

Post Number: 519
Registered: 08-2002
Posted on Friday, July 18, 2003 - 01:03 pm:   Edit Post Delete Post Print Post

If you have a nasty scratch and light colored paint try a VERY fine buffing polish. They make some stuff for acylic aquariums that works well, but I use bar keepers friend.

Beware though. I have used it to take out some nasty stuff. Have no idea how it works on anuything other than white paint.

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration