| Author | Message | ||
     Chris Welch (Asigiam60) New Member Username: Asigiam60 Post Number: 3 Registered: 03-2003 |
I searched but didn't see a link for a manual. I destroyed mine by accident and am putting it on right now. It doesn't look hard, but I want to make sure I don't miss anything. It's a 97 Disco. I've emailed a few folks, but wanted to post just to be on the safe side  Thanks Chris Welch | ||
| Al (Discoal) New Member Username: Discoal Post Number: 27 Registered: 02-2002 |
You got a manual? Pretty straight forward. 6 bolts plus hook up wires. May need a rubber hammer to set into position. Run the light holders to light fixtures. Simple but better if you have help installing the bumper. I put my on myself. You'll be Ok. | ||
| Greg French (Gregfrench) Senior Member Username: Gregfrench Post Number: 505 Registered: 11-2002 |
Just remove any bolts that look like they are holding the bumper onto the frame. As Al said, there should be 6. You may have to splice the wires on the lights. | ||
| Jaime Crusellas (Jaime) New Member Username: Jaime Post Number: 40 Registered: 05-2003 |
I put mine on solo. Just balanced it on a spackle bucket and bolted it on. The marker lights just plugged in, and I only had to unhook the hoses for the light washers in order to thread them through the appropriate openings. It even takes the original rcovery loop that's on the driver's side frame rail, and if you want you can bolt the original air dam under it (I didn't) |
