Engine Vacuum Hose Routing.

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Jason Urban (Geflackt) New Member Username: Geflackt Post Number: 35 Registered: 03-2003 Posted on Wednesday, July 23, 2003 - 09:26 pm:    I'm finishing up the intake and water pump change on my '95 LWB 4.2L. Not shown in the pictures I took as a I took it apart is the routing of the vacuum lines near the back of the engine. Most specifically, the line running from the fuel pressure regulator. Where does this go?? Where does the hose connected to the valve cover go?? Thanks! Jason.   Jason Urban (Geflackt) New Member Username: Geflackt Post Number: 36 Registered: 03-2003 Posted on Friday, July 25, 2003 - 08:03 am:    Was able to answer my own questions thanks to the archives... The short tube goes from the regulator to the fitting just below the IAC port. The valve cover tube matched up with a tube hanging at the back near the firewall. Jason.