| Author | Message | ||
     Don E. Rayner (Derayner) New Member Username: Derayner Post Number: 33 Registered: 04-2003 |
Anyone know of a source for a mid-range camshaft for a 98 4.0.Thanks for any assistance, Don | ||
| colin astley (Cra_arc) New Member Username: Cra_arc Post Number: 30 Registered: 07-2003 |
don here is a good site in the uk, http://www.v8engine.com/ | ||
| eric johnson (Eric2) Member Username: Eric2 Post Number: 78 Registered: 05-2003 |
RPi is a good source in the U.K. In the U.S., Crane, Erson, Isky (Iskenderian) and other cam manufacturers make cams for the Rover V-8. I know of one shop that uses Crane. The milder cam he uses will pass the Calif. emission test. It is still much better than the stock cam. Another very good shop in the L.A. area uses an Erson cam...the Erson plant is only a couple of blocks down the street. It must be fine with the emission test too. I'm having an Isky cam put in my 3.9. | ||
| Shaun Power (Shaunp) Member Username: Shaunp Post Number: 125 Registered: 05-2003 |
Tighe cams in Australia have some good rover grinds www.tighecams.com.au |
