Author |
Message |
   
Jon Bowers (Jonbowers7)
Member Username: Jonbowers7
Post Number: 75 Registered: 07-2002
| Posted on Tuesday, August 05, 2003 - 07:19 pm: |
|
Here's a good one: Just installed a TJM rear bumper. Everything went great, bumper is awesome, but for some weird reason, my left directional blinks fast (like there's a light out), but there isn't. The right one is fine. Anyone run into this one? I've checked connections, etc over and over.... Thanks for any suggestions, Jon |
   
Alan Yim (Alan)
Senior Member Username: Alan
Post Number: 699 Registered: 09-2002
| Posted on Tuesday, August 05, 2003 - 07:22 pm: |
|
Sorry Jon don't have any suggestions but do you have any pictures of the new setup?? |
   
Erik G. Burrows (Erik)
Senior Member Username: Erik
Post Number: 259 Registered: 04-2002
| Posted on Tuesday, August 05, 2003 - 07:45 pm: |
|
Are the bulbs in the new bumper the same wattage as the old bulbs? If they're less it could fool the BCU into thinking a bulb is out. |
   
John (Jroc)
Member Username: Jroc
Post Number: 137 Registered: 08-2002
| Posted on Tuesday, August 05, 2003 - 09:14 pm: |
|
I had a problem with a short when I replaced my rear bumper with a TJM. I didn't secure the rear side lights when I cut them, as there was no place for them in the TJM. After blowing a few fuses I finally figured it out. Hope this helps. Good Luck.
|
   
Peter J Blatt (Peteb)
Member Username: Peteb
Post Number: 203 Registered: 10-2002
| Posted on Wednesday, August 06, 2003 - 06:12 pm: |
|
Did you look at the front signal? is it is out, the rear will blink double time, Peter. |
   
Roger M (Ciscowiz)
Member Username: Ciscowiz
Post Number: 68 Registered: 02-2003
| Posted on Thursday, August 07, 2003 - 02:15 pm: |
|
I just pruchased a TJM for my 97 Disco. Has anyone hit the rear corners and how did it hold up? Rog |