| Author | Message | ||
     martyn evans (Evansash) New Member Username: Evansash Post Number: 4 Registered: 12-2002 |
Cruise control on Disco 1 not working. Speed can be set and increased on + button but does not hold this speed and gradually slows down when button released. Recently replaced ABS sensors - is this likely to be a link? | ||
| Porter Mann (Porter) New Member Username: Porter Post Number: 34 Registered: 05-2003 |
check vacuum leak. This is the main culprit for this problem, mine was doing the same - wasn't holding speed, especially when going uphill. Look in the engine compartment on the driver side near the firewall should be some black thin hoses, somewhere on there is a T. Check all the ends of the hoses for cracks. If there are, cut it off and refit. Takes 2 minutes. |
