1990 Range Rover Wheel sizing

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Brian Anderson (Hans) New Member Username: Hans Post Number: 9 Registered: 08-2003 Posted on Thursday, August 21, 2003 - 12:18 pm:    Hey all, I'm trying to buy some steel wheels for a 1990 Range and not sure what I should be looking at here is some of the info from the particular wheel: Size 16 X 7 Bolt Circle 5 X 5.50 Back Spacing 4.00 INCHES Offset 0MM, .000 INCHES Hub Size 72.64 MM/2.86 IN. Will this work or should the bolt circle or back spacing be different? Thanks, Brian   Randall Smith (Mr_smith) Member Username: Mr_smith Post Number: 49 Registered: 04-2003 Posted on Thursday, August 21, 2003 - 01:01 pm:    Bolt circle is 6.5" in diameter. Back spacing is 5.375" There are several LR steel wheels which will work.   Brian Anderson (Hans) New Member Username: Hans Post Number: 10 Registered: 08-2003 Posted on Thursday, August 21, 2003 - 01:27 pm:    Thanks, Are there any non L.R. wheels that will work? I'm (of course) trying to find some cheap steel wheels.   Bill Bettridge (Billb) Dweb Lounge Member Username: Billb Post Number: 979 Registered: 02-2002 Posted on Thursday, August 21, 2003 - 01:32 pm:    Brian - you can check out what Gulf Coast Rovers has to offer. Also - Trek Outfitters I think carries steel wheels. Bill   Brian Anderson (Hans) New Member Username: Hans Post Number: 12 Registered: 08-2003 Posted on Thursday, August 21, 2003 - 01:34 pm:    Hey Bill, Can you imagine what truck these might be for???   Bill Bettridge (Billb) Dweb Lounge Member Username: Billb Post Number: 980 Registered: 02-2002 Posted on Thursday, August 21, 2003 - 01:43 pm:    I figured Damn - don't even have it yet and already planning the mods! LOL You might check to see if you can get a good deal on stock Disco steel wheels through the dealership - not sure if you get discounts or not, but it might be worth checking. Bill   Brian Anderson (Hans) New Member Username: Hans Post Number: 13 Registered: 08-2003 Posted on Thursday, August 21, 2003 - 01:59 pm:    Strangely enough, those cost the dealership over $140 a piece! Land Rover is pretty proud of their parts   Bill Bettridge (Billb) Dweb Lounge Member Username: Billb Post Number: 981 Registered: 02-2002 Posted on Thursday, August 21, 2003 - 02:55 pm:    Also - I've seen some good deals around the Dweb lately and even from some vendors like AB, etc on the "wolf" wheels - stock offset, but very thick. Bill