Torque values for transmission pan

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   troy Harlow (Th22973) New Member Username: Th22973 Post Number: 9 Registered: 08-2003 Posted on Friday, August 22, 2003 - 05:18 pm:    Does any have the torque valuse and or sequnce for tightening the 10 mm bolts on the transmission drain pan. I have leaks, Troy   Kristopher March (Apexdisco) Member Username: Apexdisco Post Number: 151 Registered: 02-2002 Posted on Friday, August 22, 2003 - 06:59 pm:    Nm Coupling shaft to mainshaft 42* Filler tube to sump 68 Gear change lever to gearbox 25 Cooler pipe adaptor to gearbox 42 Securing screws - clutch F 10 Securing screw - parking pawl 10 Securing screws - pump 10 Intermediate plate plugs (M20) 50 Intermediate plate plugs (M14) 40 Bell housing mounting bolts 46 Governor mounting screws 10 Extension housing bolts 23 Control unit mounting bolts 8 Sump plug 10 Mounting screws for sump 8 Drive plate to converter 39* Gearbox to engine 42 Strut (threaded end) 42 Bottom cover to converter housing 9 Cover - converter housing 9 Drive plates to crankshaft adaptor 40* Adaptor to crankshaft 84 Let me know if this is what you're looking for.   troy Harlow (Th22973) New Member Username: Th22973 Post Number: 10 Registered: 08-2003 Posted on Saturday, August 23, 2003 - 09:23 am:    That is great thanks so much Troy