HOW DOES ONE RESET ABS SENSOR?????

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Anthony Luke (Coolhand) New Member Username: Coolhand Post Number: 20 Registered: 06-2003 Posted on Tuesday, September 16, 2003 - 12:26 pm:    Can someone please tell me how to reset ABS sensor. Please use terms a novice would understand ( then I'll ask him to explain it to me)!   Bill Bettridge (Billb) Dweb Lounge Member Username: Billb Post Number: 1074 Registered: 02-2002 Posted on Tuesday, September 16, 2003 - 02:09 pm:    Disco 1 - instructions Simply pull up sensor slightly (gently) and then push it in/down (depending on front or rear) as far as it will go by hand. Sensor will hit the exciter ring on the CV joint (front) or sensor ring on the brake disc (rear) and then self-gap once you start driving. Bill   Anthony Luke (Coolhand) New Member Username: Coolhand Post Number: 21 Registered: 06-2003 Posted on Thursday, September 18, 2003 - 04:11 pm:    where exactly are the sensors? thanks for the reply Bill   Bill Bettridge (Billb) Dweb Lounge Member Username: Billb Post Number: 1082 Registered: 02-2002 Posted on Friday, September 19, 2003 - 03:21 pm:    Front - on top of swivel housings - near brake line clamp plate - follow 1/4" thk black wire from fender well down. Rear - in side of hubs - start inside the axle and follow same 1/4" black wire to sensors which are pushed in horizontally (vs. vertically in the front) Bill   Blue (Blue) Dweb Lounge Member Username: Blue Post Number: 513 Registered: 04-2003 Posted on Friday, September 19, 2003 - 04:54 pm: