Help with installing DBA rotors

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Rob Mayes (Bertofcsa) New Member Username: Bertofcsa Post Number: 2 Registered: 02-2003 Posted on Saturday, September 27, 2003 - 09:52 am:    i just got a new set of DBA vented rotors to replace my stock ones in the front and rear. the rear ones went on fine but the front ones are too thick to fit. is there anything i can do to make them fit? thanks   Joey (Joey4420) Member Username: Joey4420 Post Number: 249 Registered: 04-2003 Posted on Saturday, September 27, 2003 - 10:01 am:    Did you get vented or cross drilled and slotted? If you got vented ones, you will need spacers for the calipers in order to make them fit. If you got cross drilled and slotted, you should be able to use a c-clamp and an old brake pad across both pistons and make room for new pads and rotors.   Rob Mayes (Bertofcsa) New Member Username: Bertofcsa Post Number: 3 Registered: 02-2003 Posted on Sunday, September 28, 2003 - 02:26 pm:    I have the vented ones. where can i get these spacers?   Joey (Joey4420) Senior Member Username: Joey4420 Post Number: 257 Registered: 04-2003 Posted on Sunday, September 28, 2003 - 08:24 pm:    Rob, I am looking into that myself....I know that scorpion racing sells a spacer kit. I also know that the following guy in Canada sells their stuff, but the price he gave more for the whole package was more than I wanted to spend....just didn't get a price breakdown yet... Canada: Darren Rover Guard 557 Rue Cherrier Montreal (Quebec) H2L 1H2 Canada Tel: (514) 842 - 7204 E-mail: [email protected]