Author |
Message |
   
Jason Lord (Ronan)
Member Username: Ronan
Post Number: 128 Registered: 10-2002
| Posted on Saturday, September 27, 2003 - 08:55 pm: |
|
What is the correct socket size to use on an impact wrench for the factory lug nuts on a D2? 1 1/16? Jason |
   
Joel (Joel)
New Member Username: Joel
Post Number: 9 Registered: 05-2003
| Posted on Saturday, September 27, 2003 - 09:13 pm: |
|
Yes |
   
DiscoDon (Discodon)
New Member Username: Discodon
Post Number: 24 Registered: 08-2003
| Posted on Saturday, September 27, 2003 - 09:32 pm: |
|
metric 27mm socket. |
   
OLIVER CLOTHSOFF (Everythingleaks)
Senior Member Username: Everythingleaks
Post Number: 322 Registered: 10-2002
| Posted on Saturday, September 27, 2003 - 11:40 pm: |
|
would also recommend a 6 point socket to go with the 27mm |
   
Jack Parker (Jack)
Member Username: Jack
Post Number: 221 Registered: 03-2002
| Posted on Sunday, September 28, 2003 - 11:28 am: |
|
http://www.discoweb.org/cgi-bin/discus/show.cgi?tpc=17&post=157520#POST157520 Read and heed this advice. |
   
Jason Lord (Ronan)
Member Username: Ronan
Post Number: 129 Registered: 10-2002
| Posted on Sunday, September 28, 2003 - 12:44 pm: |
|
Thanks guys - I was wondering about the 27mm vs 1 1/16 size. Seems most recommend the 1 1/6th as a closer fit if using an impact wrench. Jason |
   
John Lee (Johnlee)
Dweb Lounge Member Username: Johnlee
Post Number: 522 Registered: 03-2003
| Posted on Sunday, September 28, 2003 - 02:13 pm: |
|
Use 17/16 all the time, whether using an impact wrench or hand ratchet. 17/16 fits better than 27mm.
|