| Author | Message | ||
     Gus Moreno (The_cameleon) New Member Username: The_cameleon Post Number: 11 Registered: 09-2003 |
I am not sure on wether I should do it or not. I've seen several people and it looks great but I am a little afraid that once I do it is going to look too ugly. What is the best way to trimm the front bumper on a disco II? Is it recommended at all? Is there any issues that I have to be aware of? thanks, Gus. | ||
| Jamil Abbasy (Jamooche) Member Username: Jamooche Post Number: 104 Registered: 05-2003 |
I say sell your front bumper and buy a Rovertym slim line bumper. The LR plastic bumper offers no protections and will just crack when you bang it against something. http://www.pbase.com/image/21353088 Jamil | ||
| Gus Moreno (The_cameleon) New Member Username: The_cameleon Post Number: 12 Registered: 09-2003 |
Jamil how much is that bumper? and do you think there is demand for my stock bumper? thanks gus | ||
| Jamil Abbasy (Jamooche) Member Username: Jamooche Post Number: 105 Registered: 05-2003 |
The bumper is $850 with the full brush bar and $200 for the skid plate so it is a much more expensive route than trimming. http://www.rovertym.com/slimline.htm You can sometimes see the stock front bumpers on ebay for around $3-400, more if you have the fog lights on the bumper. | ||
| Tom V (Cozmo) Member Username: Cozmo Post Number: 181 Registered: 09-2002 |
Gus I did my front bumper not to long ago. I used a cutting wheel on my drill. It was easy all you need is a steady had. Oh yeah wear gloves and protective eyewear the plastic the drill kicks back on you sure is hot. I might have a line on a used saudi spec bumper. Not sure if its still there. | ||
| Alen Babayan (Alen) Member Username: Alen Post Number: 55 Registered: 11-2002 |
Gus, i have one off of my 2000D2 that its cut but has holes for front IPF center lights. Let me know if your interested ill send u pics. |
