| Author | Message | ||
     Mark T (Flybye) New Member Username: Flybye Post Number: 21 Registered: 08-2003 |
Has anyone installed these on a SLS disco, I don't have any directions, I would like to know aprox install time, and the best way to install. thanks | ||
| Rick Neff (Lostinboston) Member Username: Lostinboston Post Number: 47 Registered: 06-2003 |
I forgot how long it took but it is pretty easy. Jack up your truck and remover the rear wheel. You can let the air out if the air bags by loosening the connection to the valve with a 10 mm wrench. It is in a box under the driver side door. the cover is held on by 2 flat head screws. The hose on the right is for the right side, left for left side and middle is the intake from the pump. You can also loosen the hose on top of the bags themself. the bags are held on by 2 clips on top of them and a plate on the bottom. Once the clips are out you can slide the bags down and twist it 90 degrees. they should then be free, but still attached to the hose up top. THen simply bolt on the spacers and reinstall the bag. you will also need to bolt the sensor spacers on the radius arms. Hope that helps. There are more detailed instructins in the archives of the D2 list if need be. -Rick |
