| Author | Message | ||
     Chad Mayes (Cmayes) Member Username: Cmayes Post Number: 99 Registered: 04-2003 |
I have a broken fan blade, luckily nothing else. I remember reading a few months back about metal fan units. Has anyone swapped the plastic LR fan with a metal one? I tried searching the archives but no luck. Part numbers and/or purchase location would be very helpful. The dealer has the standard fan blade for $98 if there isn't a good alternative. Thanks. | ||
| Joey (Joey4420) Senior Member Username: Joey4420 Post Number: 312 Registered: 04-2003 |
Sent you mail | ||
| Chad Mayes (Cmayes) Member Username: Cmayes Post Number: 100 Registered: 04-2003 |
Joey - Didn't get your mail. Thanks. | ||
| Sergei Rodionov (Uzbad) Member Username: Uzbad Post Number: 129 Registered: 08-2003 |
Chad - standard fan blade is like 50$ from roversnorth.com And i just swapped mine with broken blade to metal flexalite 17" one. Its pain in butt, b/c you have to do all precise measurements as our fans got 3 bolts pattern and most stuff available - 4 bolts. Plus you will need to invent spacer, as they all 4 bolts too. Other than that - piece of cake  | ||
| Joey (Joey4420) Senior Member Username: Joey4420 Post Number: 313 Registered: 04-2003 |
Chad can you accept Attachments? Send me an email and I will response with the Fan pic with Part number and info. | ||
| Chad Mayes (Cmayes) Member Username: Cmayes Post Number: 101 Registered: 04-2003 |
I took the fan off of the viscous unit last night and it was held on by 4 allen bolts... | ||
| Sergei Rodionov (Uzbad) Member Username: Uzbad Post Number: 130 Registered: 08-2003 |
I am not talking about pattern on viscous unit, but about pattern on pump itself. There isnt much space to fit anything serious if you still want to use viscous unit  at least i gave up on it. | ||
| Chad Mayes (Cmayes) Member Username: Cmayes Post Number: 102 Registered: 04-2003 |
Joey - I sent you an email... |
