Advice on the head light now...

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Marco A Mendoza (Kkngtgr) New Member Username: Kkngtgr Post Number: 9 Registered: 10-2003 Posted on Saturday, October 18, 2003 - 02:22 pm:    hi, I have another question, the right low beam of the head light doesn't work, I replace both bulbs (l & r) but still no low bem on the right side, any ideas? thanks Marco   Paul D. Morgan (V22guy) Dweb Lounge Member Username: V22guy Post Number: 2067 Registered: 02-2002 Posted on Saturday, October 18, 2003 - 04:51 pm:    #1 Unwrap Tape. #2 Check wire to socket connection. #3 Repair if necessary.   Bill Howell (Billh13) Member Username: Billh13 Post Number: 207 Registered: 03-2003 Posted on Sunday, October 19, 2003 - 07:28 pm:    Or you could just change the fuse that is blown under the dash.   Rans (Rans) Senior Member Username: Rans Post Number: 594 Registered: 08-2002 Posted on Monday, October 20, 2003 - 06:50 am:    What Bill said....there are 4 seperate fuses for the headlights, one for each low beam (L & R) and one for each high beam (L & R) Find the correct fuse and you will likely be all set.   Paul D. Morgan (V22guy) Dweb Lounge Member Username: V22guy Post Number: 2071 Registered: 02-2002 Posted on Monday, October 20, 2003 - 07:50 am:    Good Call Randy and Bill, Randy knows that I just love to take things a part   Rans (Rans) Senior Member Username: Rans Post Number: 599 Registered: 08-2002 Posted on Monday, October 20, 2003 - 08:03 am:    Take apart, or break apart, either way....LOL just a few weeks to Solaros!!!   Luke Tolson (Luke4696) Senior Member Username: Luke4696 Post Number: 259 Registered: 06-2003 Posted on Monday, October 20, 2003 - 09:10 am:    Or you could swap in some '03 DII lights!!!!   Marco A Mendoza (Kkngtgr) New Member Username: Kkngtgr Post Number: 15 Registered: 10-2003 Posted on Tuesday, October 21, 2003 - 10:04 am:    Thanks guys, I'll go check the fuses right away, but just in case ...how much for the '03 DII Lights? Marco   Marco A Mendoza (Kkngtgr) New Member Username: Kkngtgr Post Number: 18 Registered: 10-2003 Posted on Thursday, October 23, 2003 - 10:20 am:    dead on guys, it was the fuse, thanks a lot. Marco   Paul D. Morgan (V22guy) Dweb Lounge Member Username: V22guy Post Number: 2081 Registered: 02-2002 Posted on Thursday, October 23, 2003 - 11:07 am:    Damn, I was ready to break out my exacto knife to cut wires