| Author | Message | ||
     Gus Moreno (The_cameleon) New Member Username: The_cameleon Post Number: 24 Registered: 09-2003 |
After changing the CV boot and brakes, the TC traction control, ((ABS)) and descending light have been on. The descending light has an exclamation symbol next to it.I am not sure if is something I did or something wrong with the car. How do I turn this off? Is the dealer the only option? Thanks, Gus 2000 DSII | ||
| Frank Rafka (Mongosd2) Dweb Lounge Member Username: Mongosd2 Post Number: 159 Registered: 02-2003 |
Gus, you have a ABS sensor out...the only way I know to turn them off, other than ripping them out of the dash, is to have the dealer do a reset with testbook. The ABS/Hill desent/TC are warning lights, meaning they work, but a very diminshed level...like not at all... Frank | ||
| Stephen Hawkins (Madmole) New Member Username: Madmole Post Number: 16 Registered: 07-2003 |
Get under and push the senders back into the hubs properly. you must have dislodged them while underneath The computer will reset itself if the sensors are reading spinning wheels again | ||
| Frank Rafka (Mongosd2) Dweb Lounge Member Username: Mongosd2 Post Number: 164 Registered: 02-2003 |
It's not that easy...the ABS sensor is on the hub, unless you removed the axle from the hub, it's really hard to dislodge them when changing just the brakes...and if you are getting error codes from TC and HDC because of the ABS, you need to do a SLABS reset with testbook...been down this road... |
