OME and 235/85 questions

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Martinez luis ignacio (Nacho) New Member Username: Nacho Post Number: 2 Registered: 10-2003 Posted on Wednesday, November 12, 2003 - 02:56 pm:    I would like to get the OME Shocks and springs for my DISCO I TDI(N115 &N44 Shocks / 751 & 762 Spring), could you guys tell me about the lift i´m getting with this setup? What about Fitting 235/85 tyres with OME ?,do i need to trim the arches ??? Thanks ....   Jose A Cabrera (Jcabrera) Member Username: Jcabrera Post Number: 162 Registered: 02-2002 Posted on Saturday, November 15, 2003 - 09:55 pm:    Nacho, I have a similar set up on my DI. If you plan to offroad it, definitely trimming is necessary, I trimmed about 2 inches. Good Luck!   Peter J Blatt (Peteb) Senior Member Username: Peteb Post Number: 287 Registered: 10-2002 Posted on Sunday, November 16, 2003 - 10:57 pm:    same set up here, you could relocate the rear well area with a spacer, or do a ct cut, eather will do Peter.   Nathan Hindman (Nathanh) Member Username: Nathanh Post Number: 101 Registered: 07-2002 Posted on Monday, November 17, 2003 - 02:05 pm:    Martinez, Because the Diesel engine is heavier than the V8, you'll probably have to either put taller springs on like the 767s or fit a spacer in the front. The 751s up front will likely only givbe you a 1" lift with a HD bumper and winch and a diesel lump... Thanks, Nathan Hindman http://www.pangaea-expeditions.com