| Author | Message | ||
     Gordon Turner (Gordo) New Member Username: Gordo Post Number: 39 Registered: 07-2003 |
Today my brother in law and I were out wheeling around. During a fairly nasty ditch crossing my bros truck died. He was on it pretty hard and all crossed up so something must have given out. When we put it into gear it just whines. We popped the rear propshaft off and you can hold rear output and change the pitch. Any chance this could be the VC? I am thinking a shaft broke somewhere. By the way when you jack it up you can spin all the driveshafts and everything seems connected as the front shaft turns with the rear. It will not move though. When you shift it back from drive to park, it grinds bad like the •••••• is trying. Any help/ideas are appreciated. thanks Gordo | ||
| J. Michael McCaig (Lrover) New Member Username: Lrover Post Number: 27 Registered: 01-2003 |
Worked on a RRC with the same symptoms and the chain had broken in the BW transfercase. ended up swapping in an LT230 | ||
| Gordon Turner (Gordo) New Member Username: Gordo Post Number: 40 Registered: 07-2003 |
Thanks for your help guys. It was a stripped output shaft in the rear. Bought a used one from Roversland and we are golden! Wheeling Friday night!! thanks Gordo |
