| Author | Message | ||
     Lionel (Fromage) Member Username: Fromage Post Number: 70 Registered: 02-2003 |
Hey Rover Folks! Anyone knows or has info regarding the minimum thickness for Disco 1 rotors (front and back)? Thanks, Lionel (95 D1 195k and counting) | ||
| Clif Ashley (Cta586) Senior Member Username: Cta586 Post Number: 409 Registered: 04-2002 |
As far as the exact measurement, it eludes me. However, I would not have the stock rotors turned more than once. They are not so hefty. DBA (www.expeditionexchange.com) | ||
| Lionel (Fromage) Member Username: Fromage Post Number: 71 Registered: 02-2003 |
Clif, Thanks. I can't find any info on D1 rotors on EE. They have a cool documented D2 pad change though... Lionel | ||
| Matthew (Lzxray3) New Member Username: Lzxray3 Post Number: 5 Registered: 11-2003 |
My service manual says that land rover does not quote a specified minimum thickness and to conssult with land rover dealer for advice.I wasn't sure about mine so I replaced them with the Disc Brakes Australia rotors front and back. | ||
| Clif Ashley (Cta586) Senior Member Username: Cta586 Post Number: 413 Registered: 04-2002 |
I was just suggesting the DBA rotors on EE as a replacement. I dont know that there is any specific information on there abotu the OE. | ||
| John Cronin (Jec) Member Username: Jec Post Number: 78 Registered: 02-2003 |
Factory manual for a 95 D1 says 12mm (0.472 inches)minimum thickness for front and rear stock rotors. | ||
| Ian C Richards (Drakosfire) New Member Username: Drakosfire Post Number: 7 Registered: 05-2003 |
13mm front 11.5mm rear This is the Australian spec for the discs. | ||
| Lionel (Fromage) Member Username: Fromage Post Number: 72 Registered: 02-2003 |
THanks guys! Lionel |
