| Author | Message | ||
     michael harrington (Mike97d1) New Member Username: Mike97d1 Post Number: 22 Registered: 07-2003 |
i was wondering if it were posable to put a d2 brush guard on a d1 without to much hassle.at first glance it look easy,but i didn't know if any of you have done it.someone was going to give it to me,so i thought i'd ask before i picked it up... | ||
| Dave Crall (Discoverover) Member Username: Discoverover Post Number: 91 Registered: 11-2002 |
I am not sure if it will bolt right on, but measure the inside of the frame rails to make sure the width is the same and check the bolt hole pattern. I have a range rover classic brush guard on my d1 with a RR bumper. It took some work but eventually fit. The D2 bar should be wide and tall enough, but I don't know if it mounts the same way. It's probably worth a shot, it's a nice looking guard. Dave | ||
| Dean Brown (Deanbrown3d) Senior Member Username: Deanbrown3d Post Number: 1187 Registered: 02-2002 |
I dunno about the bolt pattern, but the bar itself is about 2 inches wider than the D1 version, and so it looks just slightly sucky. Dean | ||
| Tony Zuniga (Tony23007) Member Username: Tony23007 Post Number: 238 Registered: 05-2003 |
How about the H-frame, will a D2 H-frame fit a D1 or the RRC H-frame will that also fit the D1??? I just got a set of Hella and don't like the brush bars for the D1. |
