TJM T15 Bull Bar Log Out | Topics | Search
Moderators | Register | Edit Profile

DiscoWeb Bulletin Board » Message Archives » 2004 Archives - General » Archive through January 13, 2004 » TJM T15 Bull Bar « Previous Next »

Author Message
 

Jeremy J. Parkhouse (Jeremy)
New Member
Username: Jeremy

Post Number: 26
Registered: 02-2003
Posted on Sunday, December 28, 2003 - 10:29 am:   Edit Post Delete Post Print Post

Ref my TJM T15 bumper.

It's arrived at the airport in Dammam!! I have to go and pick it up tomorrow.

Can anyone tell my...Will it fit inside my Disco SII for the journey back from the airport?

I know I may have to unbox it first.

Cheers

Jeremy
(Dhahran, Saudi Arabia)
 

Axel Haakonsen (Axel)
Moderator
Username: Axel

Post Number: 664
Registered: 02-2003
Posted on Sunday, December 28, 2003 - 11:12 am:   Edit Post Delete Post Print Post

Well, it should be the same width as your current stock bumper, so measure that, figure 2 feet or so for the height of the bullbar, and see if you have enough room in the back.
If you have a roofrack, you could just throw it up there for the trip from the airport.

A Rovertym rear bumper barely fit in the back of my D1 with the rear seats removed, if that helps.

- Axel


 

Jamie (Rover_puppy)
Senior Member
Username: Rover_puppy

Post Number: 590
Registered: 05-2003
Posted on Sunday, December 28, 2003 - 03:15 pm:   Edit Post Delete Post Print Post

Jeremy,

The box that TJM shipped mine in is out in my garage. I'll go out and measure it later and post the dimensions for you.

Jamie
 

Jamie (Rover_puppy)
Senior Member
Username: Rover_puppy

Post Number: 591
Registered: 05-2003
Posted on Sunday, December 28, 2003 - 03:24 pm:   Edit Post Delete Post Print Post

Jeremy, I just remembered that I have the dimensions and a pic on my computer, no need to go outside to measure it! Box is 71" x 26" x 25" Hope this helps. Good luck getting it home, Jamie

 

Jamie (Rover_puppy)
Senior Member
Username: Rover_puppy

Post Number: 592
Registered: 05-2003
Posted on Sunday, December 28, 2003 - 03:27 pm:   Edit Post Delete Post Print Post

P.S. Weight on freight shipping receipt is listed as 160 (which I am assuming is calculated in pounds)
 

Ronnie McKinney (Ronnie)
Member
Username: Ronnie

Post Number: 85
Registered: 08-2002
Posted on Sunday, December 28, 2003 - 05:48 pm:   Edit Post Delete Post Print Post

My TJM front bumper fit in my D1 with 2 passengers so it should fit in your d2. I did have to go ahead and remove it from the box though. Just let down your back seat and push your passenger seat forward. Good luck...
 

Jeremy J. Parkhouse (Jeremy)
New Member
Username: Jeremy

Post Number: 28
Registered: 02-2003
Posted on Monday, December 29, 2003 - 08:11 am:   Edit Post Delete Post Print Post

Thats great, thanks for the info. I will do as you say and probably unbox at the airport.

Cheers all

Jeremy
 

Robert Sublett (Rubisco98)
Senior Member
Username: Rubisco98

Post Number: 1100
Registered: 04-2002
Posted on Monday, December 29, 2003 - 08:25 am:   Edit Post Delete Post Print Post

I brought mine home in my D1 from TJM HQ here in Knoxville. I had to bust out the razor knife and cut on the end of the box to make it fit. Do like the other said and push your passenger seat all the way up, rear seats down, etc. You'll make it:-)
 

Jeremy J. Parkhouse (Jeremy)
New Member
Username: Jeremy

Post Number: 29
Registered: 02-2003
Posted on Tuesday, December 30, 2003 - 11:30 am:   Edit Post Delete Post Print Post

It's in my living room!!

After many hours walking backwards and forwards with bits of paper....getting stamps and paying money.....myself and a Saudi military friend managed to clear my bumper through Saudi Customs.

It is now sitting in the centre of the living room just in front of the Christmas tree...what a present!

Unboxed it fitted in the back just fine.

Thanks again for the help.

Happy new year to all

Jeremy

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration