Where do I find these??!!

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Corey (Discobro) Senior Member Username: Discobro Post Number: 288 Registered: 12-2002 Posted on Sunday, January 04, 2004 - 01:14 am:    I have been looking around to see if these are aftermarket moldings around the wheel wells and door trim or if this is an actual trim package from LR. The picture below is of a D1 so if anyone knows where I can get this trim at let me know! Thanks!   Matt (Doc175) Member Username: Doc175 Post Number: 223 Registered: 11-2002 Posted on Sunday, January 04, 2004 - 09:39 am:    Talk to the guys at East Coast Rover. Take a look at the wheel arch molding they put on the "Discotech" they built a couple years ago. A lot of people who have seen the pictures don't like them but everyone who has actually seen the truck loves them. PS: Not to be s stickler but this probably should go into the technical section   michael a. kerr (Ethanrover98) New Member Username: Ethanrover98 Post Number: 20 Registered: 11-2003 Posted on Sunday, January 04, 2004 - 01:29 pm:    Corey, I just saw something similar to your picture on the Rover Connection website!!??   Aaron Richardet (Draaronr) Senior Member Username: Draaronr Post Number: 363 Registered: 09-2002 Posted on Sunday, January 04, 2004 - 09:09 pm:    Will tillery had some for sale in the sale section earlier. see if he sold his.   CALM (Gumarcel) Senior Member Username: Gumarcel Post Number: 1147 Registered: 11-2002 Posted on Sunday, January 04, 2004 - 09:23 pm:    DAP has them.   Jim Reynolds (4x4xfar) Member Username: 4x4xfar Post Number: 248 Registered: 05-2003 Posted on Monday, January 05, 2004 - 12:01 pm:    Corey , some have put D2 flairs on D1's. http://www.northbyrover.com/preparation.htm Here is an example-Jim   Jeff Mclaird (Granitedisco) Member Username: Granitedisco Post Number: 103 Registered: 08-2003 Posted on Monday, January 05, 2004 - 12:06 pm:    http://www.northeastbritishparts.com/.sc/ms/cat/1071931559476991/9/nc/Discovery% 20%281%29%2094%20-%2099--accessories $240 a set Jeff   Corey (Discobro) Senior Member Username: Discobro Post Number: 295 Registered: 12-2002 Posted on Monday, January 05, 2004 - 05:25 pm:    Thanks guys! Michael - the pic I posted was from the Tech section of this site. I was looking at the fender cut out samples. It may have been originally from Rover Connection. Yeah and I wasn't sure if this would be considered "technical" or not... Thanks again.   Luis Constantin (Luisc) Member Username: Luisc Post Number: 179 Registered: 02-2003 Posted on Sunday, January 11, 2004 - 11:05 pm:    I've got them. They were a dealer item or kit as it may be. I had the dealer install them before I took delivery in 98. Had them put on for the shopping cars. Didn't like them at first, but now I love them. They really do look good. They do look better on a white Rover, though.