True trac

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Matthew King (Kingmb) New Member Username: Kingmb Post Number: 5 Registered: 12-2003 Posted on Monday, January 05, 2004 - 03:43 pm:    I have 97 disco with 3 inch lift and 245/75 mtr and im going to fix the wandering problem that so many others seem to have as well. where can i get the true trac and can i install it myself? thanks for any helpful advice   Blue (Blue) Dweb Lounge Member Username: Blue Post Number: 1037 Registered: 04-2003 Posted on Monday, January 05, 2004 - 03:49 pm:    https://www.expeditionexchange.com/tractech/   Jim Reynolds (4x4xfar) Senior Member Username: 4x4xfar Post Number: 251 Registered: 05-2003 Posted on Monday, January 05, 2004 - 03:49 pm:    Matthew , here you go : https://www.expeditionexchange.com/tractech/ -Jim   Blue (Blue) Dweb Lounge Member Username: Blue Post Number: 1038 Registered: 04-2003 Posted on Monday, January 05, 2004 - 03:51 pm:    LOL   Jim Reynolds (4x4xfar) Senior Member Username: 4x4xfar Post Number: 252 Registered: 05-2003 Posted on Monday, January 05, 2004 - 03:51 pm:    Blue, they say great minds think alike!! Look at the time of the post!   Blue (Blue) Dweb Lounge Member Username: Blue Post Number: 1039 Registered: 04-2003 Posted on Monday, January 05, 2004 - 03:52 pm:    LOL, did it again   Jim Reynolds (4x4xfar) Senior Member Username: 4x4xfar Post Number: 253 Registered: 05-2003 Posted on Monday, January 05, 2004 - 03:52 pm:    LOL   Jim Reynolds (4x4xfar) Senior Member Username: 4x4xfar Post Number: 254 Registered: 05-2003 Posted on Monday, January 05, 2004 - 03:53 pm:    And again.....   Will Cupp (W_cupp) Senior Member Username: W_cupp Post Number: 279 Registered: 07-2003 Posted on Monday, January 05, 2004 - 04:34 pm:    www.rovertym.com   eric johnson (Eric2) Member Username: Eric2 Post Number: 198 Registered: 05-2003 Posted on Monday, January 05, 2004 - 04:46 pm:    Well, I'd fix the wandering issue first before I put in a TT. I thought somebody made special swivel balls that were drilled so the camber angle was brought back to spec.   Bill Bettridge (Billb) Dweb Lounge Member Username: Billb Post Number: 1352 Registered: 02-2002 Posted on Monday, January 05, 2004 - 05:15 pm:    TT will correct the wandering issue - that's the whole point. RTE is no longer doing the ball redrilling - not enough demand apparently Bill