Wheel Speed Sensors Bill Bettridge or...

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Joseph Bilyk (Denverrover) Member Username: Denverrover Post Number: 117 Registered: 02-2003 Posted on Wednesday, January 07, 2004 - 05:27 pm:    Hey guys I need help re-seating my wheel speed sensors for ABS. I know that there were some pictures out there. Can you please help me out? I changed front pads & I must have screwed something up..... thanks much joe   Will Tillery (Will) Senior Member Username: Will Post Number: 260 Registered: 11-2002 Posted on Wednesday, January 07, 2004 - 08:48 pm:    Installation is easy, slide it through its seal & tap it all the way down with a wooden dowel . Once it is all the way in, turn steering lock to lock & it will adjust itself to the proper depth. Avoid driving before you carry out this procedure or it may damage it by contacting the sensor ring.   Bill Bettridge (Billb) Dweb Lounge Member Username: Billb Post Number: 1362 Registered: 02-2002 Posted on Thursday, January 08, 2004 - 09:25 am:    Actually - just reseat the sensors like Will said and then drive - the sensors self-gap in the first turn of the CV joint and rear rotor. You won't hurt it any. The front sensors are located right on top of the swivel housing - just follow the sensor line down until you reach it. Bill