Check Engine Light..... Log Out | Topics | Search
Moderators | Register | Edit Profile

DiscoWeb Bulletin Board » Message Archives » 2004 Archives - Discovery Technical » Archive through January 18, 2004 » Check Engine Light..... « Previous Next »

Author Message
 

Josh (Badassm0f0)
New Member
Username: Badassm0f0

Post Number: 30
Registered: 12-2003
Posted on Thursday, January 15, 2004 - 06:12 pm:   Edit Post Delete Post Print Post

my check engine light had been on for some time, so i thought it was about time i read the codes. boy was i shocked when 16 codes showed. i think some of them have to do with a little fording incident awhile back. after fording a creek the disco died right on the opposite bank. i eventually got it started agian, and about 10 miles up the road i broke down. i called aaa and got towed to my house. it started the next morning and i have been driving it since (happened late nov).

THE 16 Codes are :
P0122 Generic Throttle/Pedal Position Sensor A Circuit Low Input
P1316 Land Rover Misfire Causing Excessive Emissions
P0300 Generic Random Misfire Detected
P1317 Land Rover ABS Rough Road Line Low Fault Detected
P0446 Generic Evaporative Emission System Vent Control Circuit
P1185 Land Rover HO2S Heater Circuit Open, Upstream Sensors
P1191 Land Rover HO2S Heater Circuit Open, Downstream Sensors
P1201 Land Rover Injector Open Circuit Or Ground Short, Cylinder 1
P1202 Land Rover Injector Open Circuit Or Ground Short, Cylinder 2
P1203 Jaguar Cylinder #3 Injector Circuit Open/Shorted
P1204 Jaguar Cylinder #4 Injector Circuit Open/Shorted
P1205 Jaguar Cylinder #5 Injector Circuit Open/Shorted
P1206 Jaguar Cylinder #6 Injector Circuit Open/Shorted
P1207 Jaguar Cylinder #7 Injector Circuit Open/Shorted
P1208 Land Rover Injector Open Circuit Or Ground Short, Cyl. 8
P1607 Land Rover MIL Circuit Short

what should i do?

97 Discovery
 

Robbie Donaldson (Robbie)
Senior Member
Username: Robbie

Post Number: 509
Registered: 02-2002
Posted on Thursday, January 15, 2004 - 06:16 pm:   Edit Post Delete Post Print Post

if it is running well, clear 'em all, and see if the check engine light comes back on. if it does come back on, read the codes again and go from there.
 

Josh (Badassm0f0)
New Member
Username: Badassm0f0

Post Number: 31
Registered: 12-2003
Posted on Thursday, January 15, 2004 - 06:21 pm:   Edit Post Delete Post Print Post

yeah i cleared them, and it didnt come back on. i forgot to ad that. thnks. also im about to hit 140k are there any special preventive maint. tips i should consider?
 

Robbie Donaldson (Robbie)
Senior Member
Username: Robbie

Post Number: 512
Registered: 02-2002
Posted on Friday, January 16, 2004 - 09:42 am:   Edit Post Delete Post Print Post

since your check engine light hasn't come back on, I would just chalk it up to a computer f-u when it got wet, and don't worry about it.

here is a link to some service schedules. kind of depends on what was last done on your truck on what should be done now, i would guess:
http://www.robisonservice.com/servicedep/rover_advice2.asp

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration