CDL on a 2003 Discovery

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Shannon Hudgins (Hsoil) New Member Username: Hsoil Post Number: 1 Registered: 11-2003 Posted on Saturday, January 17, 2004 - 12:00 am:    Does my 03 Disco have the selector shaft on the transfer case to allow fitting of a CDL lever like others have installed on early Series II Discos? Anyone done the CDL mod on a 03? Thanks, Shannon   Curt Perlman (Cnote) New Member Username: Cnote Post Number: 7 Registered: 01-2004 Posted on Saturday, January 17, 2004 - 12:42 am:    you are out of luck. d2 up until early 01 can add cdl   Clay W Davis (Cwdavis4) New Member Username: Cwdavis4 Post Number: 40 Registered: 09-2003 Posted on Saturday, January 17, 2004 - 12:51 am:    You can retro-fit the '03 with the t-case and other required parts from the '04 disco to add the functionality. I know this has been successfully done. The parts come to about $2400 plus labor. My biggest concern is the warranty aspect.   Michael Noe (Noee) Senior Member Username: Noee Post Number: 834 Registered: 03-2002 Posted on Saturday, January 17, 2004 - 07:18 am:    A cheaper way to do it would be to source a used LT230SE from a rolled or totalled truck and then just add one of the nice CDL actuators, metal lever, cable thingy or solenoid version. Replacing the tcase on a D2 is not a hard job. Takes longer to drop the y-pipe and frame x-members than the tcase itself.