16" Wheels

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Tarek Khalil (Pharaohdisco) New Member Username: Pharaohdisco Post Number: 20 Registered: 12-2003 Posted on Monday, February 09, 2004 - 03:04 am:    Will 16 inch D1 or D2 alloy wheels fit on a 2004 Range Rover. And if they fit, will they have the correct offset. Thanks in advance for any information.   Matt Anderson (Disco01) Member Username: Disco01 Post Number: 212 Registered: 10-2003 Posted on Monday, February 09, 2004 - 10:42 am:    Not sure, but they might fit off of a D2 or 38A. Doubtful of the D1 though.   Rick Neff (Lostinboston) Senior Member Username: Lostinboston Post Number: 287 Registered: 06-2003 Posted on Monday, February 09, 2004 - 10:49 am:    Ive heard that an '04 RR wheel will fit on a D2. I assume that the reverse is also true then. You will also probably need D2 lugnuts. The bigger problem will be the brakes. 16' wheels might not have enough clearance inside. You could get a custom 16" with extreme offset so the brakes are not inside the wheel.   Billy Deakins (Discodog) New Member Username: Discodog Post Number: 10 Registered: 11-2003 Posted on Monday, February 09, 2004 - 11:36 am:    Brakes are definitely the big problem. The discs on the RR will not allow for anything less than 18" wheels.   Tarek Khalil (Pharaohdisco) New Member Username: Pharaohdisco Post Number: 21 Registered: 12-2003 Posted on Monday, February 09, 2004 - 01:23 pm:    Rick, would you happen to know who makes these custom 16" wheels with extreme offset. The discs on the Range Rover are much larger than those of the D2. Thanks   Rick Neff (Lostinboston) Senior Member Username: Lostinboston Post Number: 290 Registered: 06-2003 Posted on Monday, February 09, 2004 - 01:33 pm:    Ive seen them in a couple off road magazines, i dont remember the website of company. You might want to try stockton wheel also, ive heard some good things about them but have not seen them in person. http://www.stocktonwheel.com/ also, 5x4.75 bolt pattern will fit, but it will not be "perfect" That pattern is more common. You could also put 18's on with Nitto 285/65/18 AT's or BFG 285/65/18 AT's or 35/12.5/18 MT's. Im running the BFG AT's   Tarek Khalil (Pharaohdisco) New Member Username: Pharaohdisco Post Number: 23 Registered: 12-2003 Posted on Monday, February 09, 2004 - 01:41 pm:    Thanks Rick, I will check stockton wheel and let you know what I have found.   Ron Brown (Ron) Senior Member Username: Ron Post Number: 689 Registered: 04-2001 Posted on Monday, February 09, 2004 - 02:58 pm:    They will not clear the calipers and rotors. The smallest that I know will clear is 18in as found on the diesel 04 RRs. If you really want 16s I would try BMW X5 wheels but I doubt they will fit.