D2 wheel lug nuts/studs -- thread size?

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Donald (Dsmcf) Member Username: Dsmcf Post Number: 115 Registered: 11-2003 Posted on Monday, February 23, 2004 - 09:51 am:    Anyone know what the thread size is on the D2 wheel lug studs? I am thinking it is M16 but am not sure about the pitch. It is certainly a finer thread than M16x2.00.   Jamie (Rover_puppy) Senior Member Username: Rover_puppy Post Number: 978 Registered: 05-2003 Posted on Monday, February 23, 2004 - 10:09 pm:    Donald, I'm not sure what you are asking, but it takes an IM340 socket to take off the lug nuts. Good Luck, Jamie   Dean Brown (Deanbrown3d) Senior Member Username: Deanbrown3d Post Number: 1468 Registered: 02-2002 Posted on Monday, February 23, 2004 - 10:43 pm:      Rick Neff (Lostinboston) Senior Member Username: Lostinboston Post Number: 322 Registered: 06-2003 Posted on Tuesday, February 24, 2004 - 10:54 am:    Take the lug nut to a good hardware store. They should have something that can tell you the thread size, whether they sell that size or not. Chances are they dnt have it but you can then order what you need online. Thats how i found out that the nuts for the sway bar downlinks are 12 x 1.25. Try finding that at your local hardware store.   Dean Brown (Deanbrown3d) Senior Member Username: Deanbrown3d Post Number: 1474 Registered: 02-2002 Posted on Tuesday, February 24, 2004 - 10:58 am:    Don - (got the winch installed yet?) Don't you have a thread measuring tool? They usually come with tap and die sets.   Michael Judd (Mrj) New Member Username: Mrj Post Number: 20 Registered: 09-2003 Posted on Wednesday, February 25, 2004 - 02:33 pm:    The lug stud thread for a Disco II is M14x1.5mm pitch. A Disco I is M16x1.5mm pitch. I hope this helps