Raised Suspension Log Out | Topics | Search
Moderators | Register | Edit Profile

DiscoWeb Bulletin Board » Message Archives » 2004 Archives - Discovery Technical » Archive through March 15, 2004 » Raised Suspension « Previous Next »

Author Message
 

Andrew Crawford (Crawfy)
New Member
Username: Crawfy

Post Number: 2
Registered: 03-2004
Posted on Sunday, March 14, 2004 - 02:36 am:   Edit Post Delete Post Print Post

Hi all, I am keen to raise the front of my Disco Higher. I am currently running an Old Man Emu Suspension System ( Sold Throughout Australia) in most 4x4 Shops. The rear has strengthened Coils thus raising the rear about 50mm, I have also installed Poly air Bags to stabilise the rear, the front has new coils but they are consistent in size to the originals.
The quetion is by raising the front to match the rear will I be placing the Vehicle above it's centre of gravity thus increasing the risk of roll over?
Hence my previous post on Pro-spacers which are banned in Oz.
 

thom mathie (Muskyman)
Senior Member
Username: Muskyman

Post Number: 648
Registered: 11-2002
Posted on Sunday, March 14, 2004 - 09:38 am:   Edit Post Delete Post Print Post

no you can not raise something above its center of gravity.

as you raise the truck its center of gravity goes up as well.

the higher the center of gravity gets the less stable the truck is off camber.

but there are other factors. softer springs allow the vehicle to transfer weight more and lean outside its footprint on turns, this is called sway. sway can be countered with sway bars as the factory does or with stiffer springs as many lifts do. or by putting wider off-set wheels on to increase track width.

long story short...when going up,go stiffer or wider to counter the higher center of gravity.

MM

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration