| Author | Message | ||
     Justin Kurosaki (Kurosaki) New Member Username: Kurosaki Post Number: 40 Registered: 02-2004 |
What is the name of the part that screws to the window motor and the glass lift mechanism? This is the plastic gear assembly and not the metal window lift. Anyone have a part #? Bentley's doesn't seem to make it very clear as to what this part is called. Is this part of the window regulator assembly or part of the lift motor assembly? I previously ordered a new window regulator, however this gear assembly was not included. The rubber "cog" is torn and this assembly is all I need to replace. thanks, justin | ||
| Mr John Kidd (Kiddo) New Member Username: Kiddo Post Number: 3 Registered: 02-2004 |
Hi, not quite sure what you mean by rubber cog. The only none metal cog I know of is, I think made of a NYLON type.This is diven by the worm gear on the motor comutator.If this is the one, you you will nead a new or used motor. (The cog is not sold seperate) ps. Check your regulator (screwed to the motor with torx screws) for fractures, looseness, gear wear etc. | ||
| Justin Kurosaki (Kurosaki) Member Username: Kurosaki Post Number: 41 Registered: 02-2004 |
Thanks john The rubber cog that I'm refering to is what connects the plastic spur gear (the gear that runs off the worm gear) to the metal pinion gear that turns the window lift. This cog is glued to the pinion shaft and fits inside the spur gear. It is there to reduce the shock on the motor and gears. The problem is that the rubber breaks down over time causing the spur gear to spin freely. Arghhh... I guess I will have to buy a new motor then... Despite the fact my old motor is just fine. -justin |
