Replace fan clutch with electric? fan? Log Out | Topics | Search
Moderators | Register | Edit Profile

DiscoWeb Bulletin Board » Discovery - Technical Discussions » Replace fan clutch with electric? fan? « Previous Next »

Author Message
 

Dave (Plain2000dii)
Member
Username: Plain2000dii

Post Number: 112
Registered: 05-2003
Posted on Thursday, April 08, 2004 - 11:54 am:   Edit Post Delete Post Print Post

I'd like to swap out the viscous clutch driven engine fan for an electric unit, but have had little luck in locating a kit for the disco. anybody done this? where can i find a decent unit? would it free up a couple ponies?
 

Jeff Mclaird (Granitedisco)
Senior Member
Username: Granitedisco

Post Number: 317
Registered: 08-2003
Posted on Thursday, April 08, 2004 - 12:10 pm:   Edit Post Delete Post Print Post

Hi Dave - pretty sure that Kenlowe do a fan kit - but you may have to order it from the UK. It should be possible to modify other fan kits to suit though. Can't remember how much hp you'll free up - have some info about this at home. I'll try and post it later.

regards

Jeff
 

Joey (Joey4420)
Senior Member
Username: Joey4420

Post Number: 732
Registered: 04-2003
Posted on Thursday, April 08, 2004 - 12:18 pm:   Edit Post Delete Post Print Post

I bought a 27" flex-a-lite fan, but it will require some minor mods to make it work, Jeff is correct on the Kenlowe fan, it is a direct fit as per my Rimmer Bros catalog.

http://www.rimmerbros.co.uk/cgi-bin/rimmer?findpart&PartID=RA1095 $280 US dollars.



 

Dave (Plain2000dii)
Member
Username: Plain2000dii

Post Number: 113
Registered: 05-2003
Posted on Thursday, April 08, 2004 - 12:52 pm:   Edit Post Delete Post Print Post

Thanks for the feedback. Odd webpage no pictures?

Price seems about right, looking forward to those HP gain numbers, jeff
 

Grant Lawson (Grant)
Member
Username: Grant

Post Number: 104
Registered: 01-2003
Posted on Thursday, April 08, 2004 - 02:00 pm:   Edit Post Delete Post Print Post

put a switch in ...turn it off and on when fording...
 

kevin mokracek (Kellymoe)
New Member
Username: Kellymoe

Post Number: 19
Registered: 03-2004
Posted on Thursday, April 08, 2004 - 02:03 pm:   Edit Post Delete Post Print Post

Kits are not Disco specific. You can use just about any elec. fan kit. Look at some Hot Rod magazines, there are tons of kits available. And probably cheaper than Kenlowe.
 

S.C.Young (Youngsc)
Member
Username: Youngsc

Post Number: 65
Registered: 10-2003
Posted on Thursday, April 08, 2004 - 02:14 pm:   Edit Post Delete Post Print Post

There is a series of fans that go by the "hurricane" name- real popular in racing and most NASCAR cars (at least the ones made in North Carolina) use them. I used one in my MG and it could probably pull the car with the fan alone. About $200. It's a universal fit, so you gotta be a little handy to make the mounts.
Thermostatically controlled with override switch. I also add a dash light that indicates when it turns on by thermostat just in case I don't hear it.

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration