Rear liftgate handle screw-Size?

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   Ivan (Isv) New Member Username: Isv Post Number: 1 Registered: 01-2004 Posted on Tuesday, February 17, 2004 - 12:10 pm:    Hello...the handle off the liftgate on the RRC has finally come off and looks like it just needs the screws replaced. I'm thinking of drilling all the way through the handle and securing it on the other side... Anyone know the size for replacement?   John Cinquegrana (Johnc) Senior Member Username: Johnc Post Number: 601 Registered: 07-2002 Posted on Tuesday, February 17, 2004 - 12:56 pm:    The two screws that hold the handle in place are 10mm x 1 1/2inch long.   A. Ali (Alia176) Member Username: Alia176 Post Number: 161 Registered: 03-2003 Posted on Tuesday, February 17, 2004 - 09:28 pm:    Ivan, Another thing you can try is to drill and tap a larger hole. Then you can use a normal bolt from the inside. If you drill all the way through, and then placing the heads of the screw on the outside of the handle...won't look as nice!