Winch on a Disco II with its standard LR wrap-around brush bar?

DiscoWeb Message Board: Archives - All topics: 2001 Archive - Technical Discussions: Winch on a Disco II with its standard LR wrap-around brush bar?
  Subtopic Posts   Updated


Top of pagePrevious messageNext messageBottom of pageLink to this message   By DeanBrown3D on Wednesday, July 11, 2001 - 02:09 am: Edit

Can you put a winch on a Disco II with its standard LR wrap-around brush bar? The land rover shop suggests that you need the A-bar instead, but I kinda like the wrap-around bar's look and functionality.

Thanks very much,

Dean Brown, NJ

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Axel Haakonsen (Axel) on Wednesday, July 11, 2001 - 03:08 am: Edit

The Land Rover shop is correct. A standard bumper/brush bar is not strong enough to mount a winch on. You need either the LR winch bar, or one of the aftermarket winch bumpers, such as ARB, Safari Gard, TJM etc.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By David on Wednesday, July 11, 2001 - 03:22 am: Edit

Simple answer is no. However, the TREK vehicles had the LR winch specific A-Bar and tray with the wrap around brush bar parts welded on. So it is possible.....

You'll just need some custom work done.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By michel on Wednesday, July 11, 2001 - 08:02 am: Edit

LR makes the winch tray with a wrap around brush bar made for it. It's a complete kit, albeit expensive. You would do better if you cut your existing bar and welded some mounts to install in the winch tray.

Michel

Top of pagePrevious messageNext messageBottom of pageLink to this message   By DeanBrown3D on Wednesday, July 11, 2001 - 10:05 am: Edit

Can you give a few more details about this winch tray?

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Michel on Wednesday, July 11, 2001 - 10:21 am: Edit

The winch tray is the mount LR sells for installing a winch on your Disco. Then you can specify either an A-Frame bar or a full wrap around bar for it. This then bolts onto the tray. It's in all the brochures under winch kit. A friend has the full brush bar on his disco with the winch tray.

Michel

Top of pagePrevious messageNext messageBottom of pageLink to this message   By chrisvonc on Wednesday, July 11, 2001 - 11:31 am: Edit

Michel, is this a new addition to the accessories line up? As of earlier this year, the full brush/winch bar was not a manufactured public part from LRNA.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Kyle Van Tassel (Kyle) on Wednesday, July 11, 2001 - 11:35 am: Edit

I dont think the full guard is here in the us. The ones that were here were off of the XDs that came with them and got taken off. I have one thats on PKs truck in CA...

Kyle

Top of pagePrevious messageNext messageBottom of pageLink to this message   By chrisvonc on Wednesday, July 11, 2001 - 11:53 am: Edit

You gave PK my XD bar?

Top of pagePrevious messageNext messageBottom of pageLink to this message   By michel on Thursday, July 12, 2001 - 07:31 am: Edit

Chris, I haven't specificaly checked for the DII, I assume if it's available for the DI then it would be for the DII. I'll see if it's a canadian thing only.

Michel

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Kyle Van Tassel (Kyle) on Thursday, July 12, 2001 - 07:40 am: Edit

LOL , yes PK is sporting the bar.. The man needed some better shit then he had..

Kyle


Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation