By Bill Bettridge (Billb) on Monday, July 16, 2001 - 04:00 am: Edit

Think I finally figured out this picture thing:

Axel and Al - followup to my post of last week or so. I too found that my Warn solenoid on my 12K had all kinds of washers and smaller connectors underneath the positive battery feeds. My question is did you wire the battery cables underneath or on top of the bus bars (my pix shows on top of)?

By Kyle Van Tassel (Kyle) on Monday, July 16, 2001 - 04:03 am: Edit

Put the cable on the post first and then the little ones after.. It shouldnt really matter, but it affected the winch.

Kyle

By Bill Bettridge (Billb) on Monday, July 16, 2001 - 04:09 am: Edit

I already moved all the little connectors and washers on top, but was wondering about the buss bars themselves?

Thanks

By Kyle Van Tassel (Kyle) on Monday, July 16, 2001 - 04:12 am: Edit

No , leave that be...

Kyle

By Axel Haakonsen (Axel) on Monday, July 16, 2001 - 04:30 am: Edit

I just moved the little connectors up on top and leaft everything else.

By Ron on Monday, July 16, 2001 - 08:37 am: Edit

http://www.quadratec.com/pdf/warn/hazard.pdf

Important!

ron

By Bill Bettridge (Billb) on Monday, July 16, 2001 - 09:57 am: Edit

Thanks Ron (and all) - hadn't ever hooked up the power disconnect solenoid, but I will have to take a look at which one they sent me.\

I was hesitating anyway because it seems like another step that could drain more power away from the winch (?)