By bret on Saturday, July 21, 2001 - 09:44 am: Edit

I just bought a pair of Hella lights for my 97 Disco. They are going to be fitted to my front brush bar. They came with a bunch of wires and instructions, but I want to run them from the factory harness. I saw a plug behind my head lights attached to a cluster of wires. Can I plug into this? Will I be able to use the factory button on my dash. Please send me an email if you have any info!! bret104@webtv.net THANKS!! bret

By Redsrover (Redsrover) on Saturday, July 21, 2001 - 02:10 pm: Edit

The factory fog lights. Remove them, replace with your Hella's up on the bar and use the factory harness you just unplugged from the factory lights. Factory bulbs are 35 or 50w and your Hella's will be 50w minimum. So, run a relay in the harness between the power source and the switch and bob's your uncle.

Ron

By Steve (Steve2) on Saturday, July 21, 2001 - 02:22 pm: Edit

bret this is bob your uncle - read my post on the 'wiring diagram for dII's' - there is a reasonably detailed explanaition of how to do it with an sd.

steve
and next time you need hellas - let me know!