By Jason on Monday, August 06, 2001 - 02:25 am: Edit

I have a Disco II and I just installed a ARB bumper the other day. I noticed that it brought the front end down about an inch and I was wondering how can I level off the truck again. I was thinking maybe OME medium duty springs would bring it back up again but I am not sure. I don't want to lift my truck and I want a good ride quality. I use my truck as a daily driver with some off-road once in a while. P.S. I won't be putting a winch on, and I have the air springs so putting a lift won't work anyway. THANKS A LOT!!!!

By Nick on Tuesday, August 07, 2001 - 04:27 am: Edit

Hey Jason,
OME springs will give you about 2 inches of lift, I am not sure how you can level the truck off but if you do put the OME springs and you have air springs you can have your dealer trick the SLS computer. They can make the air springs level off with the OME springs, but then again you said you don't want a lift, its just a suggestion. Good Luck!!!

By Wes Legaspi (Wes) on Tuesday, August 07, 2001 - 04:48 am: Edit

if you are planning to put a winch on later, you definitely need HD springs in the front to compensate for the weight...

By TCH on Tuesday, August 07, 2001 - 08:45 am: Edit

Jason-
order part # REB101340 quantity x2
from your local dealer.
They are front winch springs for the D2
TCH

By Ron on Tuesday, August 07, 2001 - 08:58 am: Edit

Or get someone here to give you a set of stock disco I front springs for free. That will get you back level.

Ron

By Alex Schubow (Alex) on Tuesday, August 07, 2001 - 03:26 pm: Edit

I've been trying to get mine out of my garage for 2 years now. Come and get 'em and they're yours. chicago area......

Alex