Low speed clicking sound from back

DiscoWeb Message Board: Archives - All topics: 2001 Archive - Technical Discussions: Low speed clicking sound from back
  Subtopic Posts   Updated


Top of pagePrevious messageNext messageBottom of pageLink to this message   By Murray (Cdnrvr) on Friday, August 10, 2001 - 03:47 am: Edit

I recently installed RT 2" springs, cones and Rancho shocks in a 95 Disco and am getting a faint clicking sound coming from the back at low speeds. I have a roto flex drive shaft - the roto flex plate looks in good shape and the drive shaft is not over extended. I am also using the stock rear links. The brakes squeak a bit - nothing unusual, squeaked before I installed the lift. The diff seems to be fine. There doesn't seem to be anything rubbing against the drive shaft (a.k.a. road kill, shopping carts, etc). I had the truck up to 90 mph and am not getting any vibrations. Anybody come across this before? Should I just spit the bit and get a u joint rear drive shaft and the rear links?

Murray

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Ron on Friday, August 10, 2001 - 03:59 am: Edit

Exhaust leak back there or the muffler maybe?

Ron

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Murray (Cdnrvr) on Friday, August 10, 2001 - 04:06 am: Edit

Checked that too ... recently installed a Borla cat back and doesn't seem to be any leaks or holes. The best way to describe the sound is like the clicking sound kids make when they stick baseball cards against their spokes with a close pin on their bike. I can only hear it when you are crawling along - once I give it some gas it is gone.

Murray

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Rob Davison (Pokerob) on Friday, August 10, 2001 - 04:18 am: Edit

man, that sounds like a nail or stone in your tire..

-rd

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Murray (Cdnrvr) on Friday, August 10, 2001 - 04:23 am: Edit

Subconsciously - maybe I am looking for a reason to install those gears I bought :) Good idea though, putting on the 235/85/R16's and that would check that out.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Rob Davison (Pokerob) on Friday, August 10, 2001 - 06:44 am: Edit

hehe, i am haveing post-partum depression over those gears...

please keep them well. maybe i will get to visit them one day...

rob

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Murray (Cdnrvr) on Friday, August 10, 2001 - 06:57 am: Edit

Don't worry - I will let them know they were adopted when the time is right. They have a good home. I used to live in West Chester, PA and visit every couple of years ... or if you are ever up this way ... I always can you use another recovery vehicle :)


Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation