Morning Brakes

DiscoWeb Message Board: Archives - All topics: 2001 Archive - Technical Discussions: Morning Brakes
  Subtopic Posts   Updated


Top of pagePrevious messageNext messageBottom of pageLink to this message   By William Turner (Wturner) on Tuesday, September 25, 2001 - 08:38 am: Edit

When I start the day, and the Rover in the morning, about the first 4 or 5 times that I use the brakes, they don't work nearly as good. When I go back out for lunch they are usually fine, and again after work. But first thing in the morning they just don't stop as easy. I've got to really stand on them if I forget that they aren't going to work and need to stop quick.

Whats the deal?

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Steve (Steve2) on Tuesday, September 25, 2001 - 09:18 am: Edit

sounds like you are having a pressure loss augmented by temperatures. if i were to take a guess- i'd say brake booster has a leak - have a shop do a pressure test to check for internal and external leaks

steve

Top of pagePrevious messageNext messageBottom of pageLink to this message   By William Turner (Wturner) on Tuesday, September 25, 2001 - 09:21 am: Edit

I have never had to put fluid in it? What would be leaking, just air presure?

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Mike B. on Tuesday, September 25, 2001 - 02:14 pm: Edit

The leakage would most probably be internal; past the seals.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By William Turner (Wturner) on Tuesday, September 25, 2001 - 03:10 pm: Edit

But if I take it to the shop, by the time I get there, they will work fine, so at that time the leak would no longer exist and they would find nothing. Right????

Top of pagePrevious messageNext messageBottom of pageLink to this message   By who knows on Wednesday, September 26, 2001 - 04:26 am: Edit

They will obviously want to keep it overnight so that they can observe the problem in the morning after it has sat.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Jon Williams (Jonw) on Wednesday, September 26, 2001 - 05:28 am: Edit

...or it could be condensation or rust on your rotors that occurs overnight. Yes, your rotors can get a little surface oxidation overnight (especially if it's damp outside) and it may take a few stops before the brake pads clear all the moisture or rust.

Try this: as you're driving down the road first thing in the morning, lightly apply your brakes and "drag" them for several seconds, while accelerating or maintaining your speed. If after that they don't grab normally, then maybe you've got a leak as previously suggested.


Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation