Rear turn signal

DiscoWeb Message Board: Archives - All topics: 2001 Archive - Technical Discussions: Rear turn signal
  Subtopic Posts   Updated


Top of pagePrevious messageNext messageBottom of pageLink to this message   By Sterling Sliter (Ster) on Wednesday, October 10, 2001 - 11:36 pm: Edit

I'm having a prolbem with the turn signals on my 95 Dicso, left turn flashes twice as fast as right turn...I've changes all front and rear left turn and stop light bulbs but the left turn still flashes at a very fast rate, any suggestions? Thanks

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Axel Haakonsen (Axel) on Thursday, October 11, 2001 - 12:48 pm: Edit

Stop light bulbs have nothing to do with it. What about the left turn signal on the fender, is that ok?

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Discosaurus (Discosaurus) on Thursday, October 11, 2001 - 04:11 pm: Edit

...are the signals in the bumper working ?

They have a nasty habit of loosing their ground since it's picked up off a friction fit.

There are NO lights on my $G rear bumper so my turn sigs flash 2X all the time. Gotta wire up something one of these days...

keith
discosaurus

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Sterling Sliter (Ster) on Thursday, October 11, 2001 - 04:30 pm: Edit

Yes, left turn signal on the fender flashes at the same fast rate, the front one does too however the rear does not flash, drivin' me nuts! Thanks for the responses.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Axel Haakonsen (Axel) on Thursday, October 11, 2001 - 04:37 pm: Edit

So the left rear is your problem, then. If it's not a burnt out bulb, it is a bad connection.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Sterling Sliter (Ster) on Thursday, October 11, 2001 - 09:22 pm: Edit

Thanks Axel, I checked the ground and it appears to be fine I'm going to change the plug and hopefully that will do it. thanks


Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation