Lights for Adventure rack

DiscoWeb Message Board: Archives - All topics: 2001 Archive - Technical Discussions: Lights for Adventure rack
  Subtopic Posts   Updated


Top of pagePrevious messageNext messageBottom of pageLink to this message   By Joshua Weinstein (Untrakd) on Tuesday, October 16, 2001 - 05:26 pm: Edit

It's that time to get some lights up top. I want opinions on which should go up there. If I go with a round lamp, it is most likely going to be a hella 4000. I have been eyeing the FF300 because they are ovals. I will have less chance of taking them out, I always see my friends ligets getting bashed up top. Thanks,

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Moe (Moe) on Tuesday, October 16, 2001 - 06:21 pm: Edit

I say go with HD axles, at least in the rear.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Warren on Tuesday, October 16, 2001 - 06:58 pm: Edit

Look a Treks Web Site. The Have a Bar that bolts onto the adventur rack the will protect lights I think it's $250. I am also in the process of putting lights on too. I am planning on getting 7 Hella Rally 4000's 3 on SG Brush Bar and 4 on roof rack. What I need to Know is how many wiring kits should I get for 7 Lamps.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Slider on Tuesday, October 16, 2001 - 09:39 pm: Edit

1 30 AMP relay per two 100 Watt bulbs.
Give the center on the bumper its own relay...
So...that's really 4 harness sets.
It's cheaper to make your own.
run 10 guage wire from the ALT for each pair...
fuse each line with a 20 or 30 amp fuse
and use 4 relays with 12 or 14 guage wire going to each light.
It's good to use a spool of 12 guage, because harnesses never seem to be long enough or too long!!

Good luck
Deisclaimer: I am not an electrician
Slider

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Warren on Wednesday, October 17, 2001 - 12:17 pm: Edit

Thanks Slider Are you still up for coon huntin with those HID's

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Slider on Wednesday, October 17, 2001 - 06:38 pm: Edit

bring'm on good buddy...

Top of pagePrevious messageNext messageBottom of pageLink to this message   By adam@PowerEnterprises.NET on Thursday, October 18, 2001 - 08:40 am: Edit

i have 4 Hella 4k's, I believe I have a wire straight from battery to lights and switch with a 25amp fuse. If that makes sense, it's what i got.

Adam

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Slider on Thursday, October 18, 2001 - 09:45 am: Edit

that's good too Adam...does that switch get warm with no relays?? And that wire must be pretty thick too?


Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation