By jmon on Tuesday, October 23, 2001 - 10:19 pm: Edit

whats a good average price for a 10mm spacer for hd ome springs....just need two...i seem to remeber 10 dollars..just want to make sure before i go shopping...trying to get rid of the lean..

By Steve (Oz93discov8) on Wednesday, October 24, 2001 - 08:22 am: Edit

I bought some steel bar 150mm wide X 10mm had it cut to 150mm long (therefore square)and drilled it myself to match the old spring retainers (not used anymore due to cones)cost me under $10 Australian and with a pair of those sitting on top of the original rear spring lower mounts have given a lift of about 30mm - just what I needed!
I also needed to get a set of 4 high tensile bolts that were a bit longer than stock.

By Warren on Thursday, October 25, 2001 - 12:23 pm: Edit

Cheep, sorry, I mean Jeep drivers use Hockey Pucks

By Ed H on Thursday, October 25, 2001 - 01:37 pm: Edit

You can order the 10mm OME spacer at 9.00 a piece.

http://www.4by4connection.com/cruiserconnection/90series.html

By Redsrover (Redsrover) on Thursday, October 25, 2001 - 02:10 pm: Edit

jmon,

Make certain you install those spring spacers (10mm or 5mm) on top of the spring not under the spring. The fronts can come unseated if they are sitting on top of the spacer. I just order 4 10mm today.

Red

By p m on Thursday, October 25, 2001 - 02:21 pm: Edit

have you ever seen it, Warren?

peter

By jmon on Thursday, October 25, 2001 - 10:09 pm: Edit

i have heard of the hockey puck thing..funny guy around the corner has hockey pucks for his ford...anyway thanks for the responses..9.00 dollars a piece is a good deal i should say...red thanks man..i was going to install them under the spring..but they do go on top...thanks again

By Redsrover (Redsrover) on Friday, October 26, 2001 - 09:39 am: Edit

jmon,

I installed a set of 10mm under my front springs and they shifted the springs on both sides out of line pretty quickly. I think a 5mm on the bottom and a 5mm on top will work fine, too. Easier to just drop a 10mm on top.

Red