Subtopic | Posts | Updated |
![]() ![]() ![]() ![]() ![]() |
Can anyone tell me the website that has the OBDII codes for the Discovery? Thanks!!
![]() ![]() ![]() ![]() ![]() |
Try -
http://www.autoemf.com.au/obdii.htm
and
http://www.obdii.com/obdii.html
These are the most comprehensive ones I have found so far. I have ask at the dealer, but no dice on getting a copy of the codes from Land Rover. Being new to the OBDII diagnostics myself, I have found that the general codes (as listed in the links above) are very helpful....good luck
![]() ![]() ![]() ![]() ![]() |
I'm totally illiterate on the subject, but can you please inform if OBDII is suitable for series II discos?
Thanks
![]() ![]() ![]() ![]() ![]() |
OBDII diagnostics are a standard in automobiles built during and/or after 1996. So though I do not know first hand, I believe the Disco II does have OBDII..
![]() ![]() ![]() ![]() ![]() |
I have a 96 Disco that just had it's Service Engine light go on at 52k. Having called the dealer to find they want $150 to run tests, then reading my manual to find it's standard to happen at this time. I've purchased my own OBD2 scanner.
My question is simple, WHERE DO I FIND THE SCAN PLUG in the Disco?
Sincerely,
Jim
![]() ![]() ![]() ![]() ![]() |
Under the dash on the right hand side of the drivers side
![]() ![]() ![]() ![]() ![]() |
52k miles - that's an emissions system service, as I remember.
![]() ![]() ![]() ![]() ![]() |
at 52k you HAVE to go to the dealer. no way around it. ...and the whole service shouldn't even cost $150.
![]() ![]() ![]() ![]() ![]() |
there's a little tan box w/a LR sticker on it, about the size of a pack of smokes. it's located behind the passenger side kick panel. peel the sticker back and put a long/narrow paper clip through the hole to reset the light. this is for the O2 sensor service reminder. no harm, just a way for the dealers to screw you for $$$. it will come on every 52k miles.
Danno
Posting is currently disabled in this topic. Contact your discussion moderator for more information. Administrator's Control Panel -- Board Moderators Only
Administer Page |
Delete Conversation |
Close Conversation |
Move Conversation