Slight drag and vibration problem

DiscoWeb Message Board: Archives - All topics: 2001 Archive - Technical Discussions: Slight drag and vibration problem
  Subtopic Posts   Updated


Top of pagePrevious messageNext messageBottom of pageLink to this message   By Ed H on Friday, November 09, 2001 - 04:45 pm: Edit

At a complete stop, when I let off the brake, before I press on the gas, I can feel a slight drag with vibration from the floor. As the speed increases, the drag goes away. I never felt that before. Is there something wrong? Any help is appreciated

Top of pagePrevious messageNext messageBottom of pageLink to this message   By dougjames on Friday, November 09, 2001 - 05:04 pm: Edit

Emergency brake hangin' up ? Only a guess..

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Bluegill (Bluegill) on Friday, November 09, 2001 - 05:36 pm: Edit

someone correct me if I'm wrong, but the disco ebrake is either on or off. You're not going anywhere with it engaged...

lubed your driveshafts lately?

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Ed H on Friday, November 09, 2001 - 06:24 pm: Edit

I just had the 90,000 mile service at the dealer. Isn't included?

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Eric N (Grnrvr) on Friday, November 09, 2001 - 06:36 pm: Edit

Maybe, but, even if it was doesn't mean they did it.. Take the grease gun and give it some squirts. Little extra isn't going to hurt.. When it starts oozing out then you know you got enough in there.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Bluegill (Bluegill) on Friday, November 09, 2001 - 07:35 pm: Edit

shafts have standard 1/4" zirc fittings - look for the fittings and you'll find them - may be buried under goop...

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Tcar on Friday, November 09, 2001 - 08:56 pm: Edit

Sticking caliper?

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Ed H on Friday, November 09, 2001 - 09:41 pm: Edit

Guys, Thanks for the info. What kind of grease do I use? I have never done it before.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Kyle on Friday, November 09, 2001 - 09:54 pm: Edit

Wheel bearing..... yep , it'll do it....


Kyle

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Brian Jackson (Nerover) on Saturday, November 10, 2001 - 10:37 am: Edit

Kyle,

Pinion grinding to a hault? 90k,,,diff time by now for most of us!

Brian


Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation