By Neil Cawley on Tuesday, November 13, 2001 - 08:12 am: Edit

I have replaced the batteries in my keyless entry keybob and now it doesn't work. Is there a way to reprogram this? Does this happen whenever you replace the batteries? This is a single button keybob for a 94 Disco.
Thanks,
neil

By Brian Jackson (Nerover) on Tuesday, November 13, 2001 - 08:39 am: Edit

yes, it's reprogrammable. I have the instructions from the dealer around here somewhere, I'll post it later this afternoon.

Brian

By Neil Cawley on Tuesday, November 13, 2001 - 10:37 am: Edit

I will be watching for them.
Thanks Brian

By Jarrod on Tuesday, November 13, 2001 - 11:46 am: Edit

So we can reprogram these things ourselves and laugh at the dealer who wants to charge $80.00??!

By Brian Jackson (Nerover) on Wednesday, November 14, 2001 - 09:29 am: Edit

This is for a Discovery with the one button remote

OK, here are the steps...

You ned two people, one in the car and one at the hood actuator (the pasenger side of the engine bay)

1. doors closed , ignition off, hood button pressed

2. steps 3-9 must be done in 8 seconds...

3.switch ignition on

4. switch ignition off

5. lock doors

6. unlock doors

7. release the hood button

8. turn ignition on

9. switch ignition off

If you've done it right, the dash LED will light and the horn will beep. For the next two minutes, you can program up to two handsets.

10. press and hold button on the handset until dash LED flashes.

11. same for the second.

DONE!

Brian

By [email protected] on Wednesday, November 14, 2001 - 10:47 am: Edit

Is this the same for a 97 disco with a two button?

tenacstud

By Brian Jackson (Nerover) on Wednesday, November 14, 2001 - 11:31 am: Edit

tenacstud,

I have no idea...but probably not. If you know somebody woth a 96-99 DI ETM they will have the info under "Anit-Theft Alarm Diagnose System"

Sorry,
Brian