Subtopic	Posts		Updated
	With the turning scenario	1		11/22 09:17pm

By ButchS on Wednesday, November 21, 2001 - 10:43 pm: Edit

Anyone? My 95 Disco is making wierd clunkin sounds everytime i turn the wheel all the way left or right. More noticeable when i turn the wheels all the way to the right, tire almost touching trailing arms, Note: i have 275-75-16. I removed the dampers, rear tie rods and still the clunk resounds and cannot be located. Does anyone know or had this problem on their Disco. Need help.

By Axel Haakonsen (Axel) on Wednesday, November 21, 2001 - 11:43 pm: Edit

What general area is the clunk coming from? If it's from "underneath the floorboard" the usual suspects would be radius arm bushings, panhard rod etc.

By Frode Hübertz Haaland (Discofrode) on Wednesday, November 21, 2001 - 08:18 pm: Edit

I would also suspect CV-joint.
frode

By Kyle on Thursday, November 22, 2001 - 08:55 am: Edit

Ax is right , check the radius arm bolts and make sure they are all tight. Also , it very well could be the panhard rod bushings...

Kyle

By ButchS on Friday, November 23, 2001 - 10:38 am: Edit

Thanx much ado guys. Am sure strong enough to turn them huge nuts and correct the clunkin. Turkey power!!! Thanks again.