No. The power module plug. I’m buying a D2 dashboard so I can get wired. It’s RHD so I’ll probably have to cut the switch and loom out of the main harness.I’ve been meaning to install mine.
There should be a double connector where the old outside mirrors are.
Thanks for the pictures. My disco is LHD so I assume it goes in the same position on the LHD side. You had to replace the door looms? Everyone says they’re already in the door taped off?Do you have a RAVE manual? https://www.dropbox.com/sh/47hbz40an5he5j2/AACH509eV_o7QhM5PoX6eFVLa
There is a another connector inside the doors just for the folding mirror's fold motor connection.
On a RHD Disco 2, The fold ecu is mounted LH side near the fuse panel area. Sometimes you can crawl under the LH side dash to find the connectors for it taped up with other cables.
Pics from my folding kit...
Did you need the door looks?Do you have a RAVE manual? https://www.dropbox.com/sh/47hbz40an5he5j2/AACH509eV_o7QhM5PoX6eFVLa
There is a another connector inside the doors just for the folding mirror's fold motor connection.
On a RHD Disco 2, The fold ecu is mounted LH side near the fuse panel area. Sometimes you can crawl under the LH side dash to find the connectors for it taped up with other cables.
Pics from my folding kit...
Yes I do I need 2. Supposedly both doors use the same loomsLooms