Recent content by discoHunter93

My R380 main shaft & lt230 input gear are stripped. Anyone have any transmission shops they trust or recommend in the central Fl area?

Ptschram, I sent my vin# to you in a private mess last wk would appreciate a quote. Thx!

Hello, I have a 93 disco which is set up a lot like the later 80's model RRC it has non ABS brake system. The vehicle had sat for almost a yr while I rebuilt the engine since the rebuild I noticed the brakes didn't work as well and I hear a hiss coming from under the dash when pressing the...

Hello every one, I recently rebuilt the engine in my disco 1 but it's running rough. I have new plugs,wires, cap and button. replaced the O2 sensors and swaped the MAF off my RRC which i know is good but the disco still runs rough. The timming is set rite and it idles fine but when I drive it it...

Hello every one, I recently rebuilt my disco 1 engine but it's running rough. The timming is set rite, I have new plugs,wires, cap and button. # 5 and 7 wires are ran correctly. replaced the O2 sensors and swaped the MAF off my RRC which I know is good but the disco still ran rough. It idles...

Hello Every one, I recently finished rebuilding the engine in my disco 1 but it's running rough seems to be a firing or fuel/emmision problem. The timming is set rite, it idles fine and I replaced O2 sensors but when I start to drive it feels like a 2 stroke bike fouling a plug. I pulled the...

bought it on line from "power steering pros" out of Cali. Yes it seems to go back to center. It feels like the pump assist is not working. Hope to work on it this wkNd. Are you refering to power steering box "adjust"? Thanks

I have a 93 Disco. if Ur not familiar w one it was kinda b4 discos had their own idenity. it's set up w a lot of RRC parts. (ie steering box) I just replaced the leaky steering box w a remanufactured one. Every thing seem 2 go back 2gether ok but the steering feels hard to turn. I tried...