I'm also starting to notice the dislike for TF arms. I was not impressed with the welds at all. The paint was also chipped in a bunch of places but I planned on painting them black anyways.
I still need rear arms so I'm planning on giving adrenaline arms a shot.
Is there any use for stock front radius arms and drive shaft?
I recently installed caster corrected arms and a DC drive shaft. Is there any value in keeping these parts as spares?
Just installed D2 front isolators on my D1 with an OME 2". Total front lift came out to 2.5", but I didnt try without the D2 isolators so I can't say if they gave me a true additional 1/2". No modifications needed, but the thread pitch on the studs are different so I just needed new hardware...
Feels so good to finally have a steady temperature reading. The problem was either air trapped in the system or a slightly clogged heater core or both.
I added a bleeder valve to the heater hose and while I was there I also reverse flushed the core. I got some small pieces of rust out and I...
Has anyone experienced coolant temps that jump up 20-30F then back down in a 1-2min span?
Recently the coolant temp readings on my scan gauge have been jumping around like crazy. But, only on the freeway. It'll be cruising around 200F, then start climbing rapidly to as high as 230F, and then...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.