Recent content by kb3ejw

i had the same problem..valley pan bolts loose on back side of motor.but,i also had a head gasket issue as well....got it all taken care of at the same time.

i run the HighCountry Off Road rear bumper with the tire carrier.it pivots with the door and has a latch for off roading.it has 2 spots for jerry cans and i mount my HiLift on the 3rd spot. i now have my ham radio antennas mounted to it as well. when i go off roading i remove the rod between...

i was running 265/75R/16 swamper ssr's on a TerraFirma 3" lift hoping these help?

i got the KC Hilites backup light kit.i did drill 2 holes in the body to mount them just above the corner finishers that since have popped off.they work well lighting up the night,especially in the woods.they say that the lights are not to be submerged.well the water was the deepest I've seen it...

I'm using the Lowrance M5 elite baja.....it was built to for use in the baja races.it is sealed well against dust and takes a 2g mini disc.tried to use an 8g but it does not support it. I'm using the internal antenna at the moment,but lost signal a few times due to the tree cover.it gets thick...

I'm an idiot!!!!!!!!!!!!!!!!!!!!! Maybe if i had followed the instructions on putting the solenoids together i would not have been riding around with the lockers engaged for a couple weeks.it helps to have the air flowing the proper direction...all is well now.i have put them together the right...

i had some time this afternoon and greased up my TW shafts and checked out my lockers. the front arb is not unlocking.is there a fix for this?? what do i need to do??

ur going to need more than 2 or 3...got all mine from tractor supply,accept the on that came with my warn kit and the 2 with my front bumper.i feel u can never have enough shackles.

i was hoping there was a way to change it over to temp.i have a Lowrance Baja on the dash telling me which way I'm going.i would rather know the temp out side.how hard would it be to replace the mirror with the proper parts??

Justin is a great guy.he has put up with my picking of his brain so much,i think he's going to change his phone number so i can't call him any more. I'm a truck driver and not home during the week.so i have to do all my stuff on Saturday.if the wife doesn't have a long honey do list. And your...

ordered one for my 01 D2 as well,i installed a 3 inch lift and mine is to long as well.i haven't done anything yet.i'm going to go over all my options. at the moment toddco is not looking good for any more of my money!

they look nice,for the factory bumper.but for those of us with aftermarket bumpers.this mod will not work..

nice looking Disco...tell us how it wheels???

you will need to replace the shafts once u go to the bigger lift. the length and angles change every time u lift a vehicle. i would wait til u do the next lift and then spend the money for the proper, well built shaft front and rear. i run the TerraFirma 3" lift and TW shafts.i have no issues...

look into rovin clowns...i know Gordie and Christine run 2" scorpion springs on his D1 and runs skinny 34" swampers.he did some minor fender trimming but it wheels well in the Pinelands of NJ. here is Christines email,i'm sure she can get u some pics of red out in the woods...